Massey Ferguson has been a fixture of American agriculture for generations, and MF tractors are still working hayfields, dairy operations, and row-crop farms across the country. Like every major brand, Massey Ferguson builds its 3 point hitches to the standard ASAE S217 / ISO 730 dimensions — which means replacement linkage parts are interchangeable across brands within the same category.
Jrs Farm Parts is an ISO 9001:2015-certified manufacturer in Ludhiana, India, exporting tractor linkage parts to the USA and 60+ countries. We manufacture top link assemblies, pins, balls, stabilizers, and leveling components for the hitch categories Massey Ferguson tractors use.
Important: Jrs Farm Parts is an independent manufacturer. We are not affiliated with, endorsed by, or connected to AGCO Corporation or Massey Ferguson. “Massey Ferguson” is used here only to describe general compatibility with MF tractors.
Which Hitch Category Does Your Massey Ferguson Use?
Massey Ferguson’s lineup covers compact, utility, and large models. Use this as a starting point — always confirm against your tractor’s operator manual.
| MF Family (General) | Typical Hitch | Notes |
|---|---|---|
| Compact models (GC family) | Category 1 | 3/4 in (19 mm) top link pin |
| Utility models (1700–5700 series range) | Category 2 | 1 in (25 mm) top link pin — the most common MF category |
| Large models (8700 series range) | Category 2 / 3 | Larger models use Cat 3 — check pin diameter |
Quick check: measure the top link pin diameter. 3/4 in = Category 1; 1 in = Category 2; 1-1/4 in = Category 3. If in doubt, confirm in your operator manual before ordering.
Massey Ferguson Linkage Parts We Manufacture
Top Link Assemblies
The top link adjusts implement angle and carries the top connection point. Our top link assemblies come with forged ball ends and UNC-thread center tubes — the standard for North American tractors — in Category 1, 2, and 3 sizes. Telescopic and ratchet-jack variants make implement hookup faster and adjustment easier in the field.
Pins and Retaining Hardware
Hitch pins, top link pins, lower link pins, linch pins, and clevis pins secure the linkage at every point. Our heat-treated pins are available across the diameters MF-category hitches use, in bent-handle, fixed-handle, and temple-handle styles for different drawbar setups.
Linkage Balls
Lower link balls are one of the highest-wear components on any linkage — they carry implement weight and pivot constantly during work. Our hardened balls (58–62 HRC, in grades such as 16MnCr5) are manufactured for the bore sizes used on Category 1, 2, and 3 lower links.
Stabilizers and Leveling Assemblies
Stabilizers prevent implement sway — especially important on utility tractors running wide implements. We manufacture chain stabilizer assemblies with turnbuckle adjusters and ratchet-jack stabilizers for Category 1 and 2 tractors, plus leveling assemblies for the adjustable right-side lift arm.
Buying for Dealers and Distributors
Massey Ferguson utility tractors are predominantly Category 2 — that is the shelf line that moves fastest for MF owners. A solid stocking pattern:
- Category 2 top links, pins, balls, and stabilizers — the core of MF parts sales
- Category 1 for compact GC models
- Category 3 for large MF machines, slower-moving but high-value
We sell wholesale to dealers, distributors, and agricultural parts suppliers. Factory-direct pricing, ~40-day export lead time, and ISO-managed quality make us a dependable supply source for the US market.
Verify Before You Order
Our parts are engineered to the standard ASAE/ISO dimensions for each category. Because Massey Ferguson models vary, we do not guarantee fitment for any specific model — always measure the pin diameters and link spacing on your tractor and confirm the part matches before ordering. If you are unsure, send us photos with a ruler for scale and we will help identify the right part.
Start Your Order
Browse the 3 point linkage parts hub for the full range, or go straight to the product categories:
Request a quote with your part numbers and quantities — our export sales team responds within 1-2 business days.
Not sure which category fits your tractor? Read our tractor linkage fitment guide.
JRS Products That Fit Massey Ferguson Category 1 Hitches
| Product | What It Is | Sizing for Cat 1 (3/4 in / 19 mm) |
|---|---|---|
| Top Link Assembly (UNC) | Adjustable top link with forged ball ends | Cat 0/1/2 options; UNC thread — the standard for North American tractors |
| Top Link End (UNC) | Replacement ball end for top link tubes | 19 mm bore (Cat 1), UNCR/UNCL |
| Hitch Pin | Drawbar and implement securing pin | Multiple diameters incl. 3/4 in range, bent/fixed/temple handles |
| Linch Pin | Quick-release retaining pin | Standard and spring variants |
| Lower Link Balls | Hardened ball for lower link sockets | 58-62 HRC, 16MnCr5, Cat 1 bore sizes |
JRS Products That Fit Massey Ferguson Category 2 Hitches
| Product | What It Is | Sizing for Cat 2 (1 in / 25.4 mm) |
|---|---|---|
| Top Link Assembly (UNC) | Adjustable top link with forged ball ends | Cat 2 option; UNC thread |
| Top Link End (MM) | Metric-thread replacement ball end | 25.4 mm bore (Cat 2), M27/M30 threads |
| Lower Link Balls | Hardened ball for lower link sockets | Cat 2 bore sizes |
| Stabilizer Assembly | Sway control for implement stability | Chain/turnbuckle and ratchet types |
| Drawbar | Trailed-implement attachment | Multiple cross-section profiles |
Frequently Asked Questions
Are these genuine Massey Ferguson parts?
No. Jrs Farm Parts manufactures aftermarket replacement parts to standard ASAE/ISO Category 1, 2, and 3 dimensions. They are designed to interchange with OEM components but are not manufactured by AGCO Corporation.
Will this top link fit my Massey Ferguson model?
If your Massey Ferguson uses a standard Category 1 or 2 hitch, the matching category part fits the standard dimensions. Because models vary, always measure your top link pin diameter and confirm the category before ordering — we do not guarantee fitment for any specific model.
How do I know which category my Massey Ferguson uses?
Measure the top link pin diameter with a caliper: 3/4 in = Category 1, 1 in = Category 2, 1-1/4 in = Category 3. Your operator manual will also state the hitch category.
Do you offer UNC and metric thread options?
Yes. Top links and top link ends are available in UNC (UNCR/UNCL, standard for North American tractors) and metric (M22-M30) threads.
Do you supply dealers and distributors?
Yes. We supply wholesale to dealers, distributors, and agricultural parts suppliers in the USA, with factory-direct pricing and standard export terms.
Verify Before You Order
Our parts are engineered to the standard ASAE/ISO dimensions for each category. Because Massey Ferguson models vary, we do not guarantee fitment for any specific model — always measure the pin diameters and link spacing on your tractor and confirm the part matches. If unsure, send us photos with a ruler for scale and we will identify the right part.
Start Your Order
Browse the 3 point linkage parts hub for the full range. Request a Quote with your part numbers and quantities — our export sales team responds within 1-2 business days.
