Mahindra has grown into one of the best-selling compact tractor brands in the United States — and it is a brand with deep Indian roots, like ours. Mahindra tractors are built to the same global standard as every other major brand: the ASAE S217 / ISO 730 3 point hitch dimensions. A Category 1 top link pin fits a Category 1 hitch, no matter which brand badge is on the hood.
Jrs Farm Parts is an ISO 9001:2015-certified manufacturer in Ludhiana, India, exporting tractor linkage parts to the USA and 60+ countries. We manufacture top link assemblies, pins, balls, and stabilizers for the hitch categories Mahindra tractors use.
Important: Jrs Farm Parts is an independent manufacturer. We are not affiliated with, endorsed by, or connected to Mahindra & Mahindra Ltd. “Mahindra” is used here only to describe general compatibility with Mahindra tractors.
Which Hitch Category Does Your Mahindra Use?
Mahindra’s lineup is strongest in the compact and utility classes, which maps cleanly onto the standard hitch categories. Use this as a starting point — always confirm against your tractor’s operator manual.
| Mahindra Family (General) | Typical Hitch | Notes |
|---|---|---|
| Compact models (2500, 2600 series range) | Category 1 | 3/4 in (19 mm) top link pin — the most common Mahindra category |
| Mid-size models (3500, 4500 series range) | Category 1 / 2 | Some use Cat 1, larger models Cat 2 — check pin diameter |
| Utility models (5000 series range and up) | Category 2 | 1 in (25 mm) top link pin |
Quick check: measure the top link pin diameter. 3/4 in = Category 1; 1 in = Category 2. If in doubt, confirm in your operator manual before ordering.
Mahindra Linkage Parts We Manufacture
Top Link Assemblies
The top link controls implement angle and connects the implement mast to the tractor. Our top link assemblies come with forged ball ends and UNC-thread center tubes — the standard for North American tractors — in Category 1 and 2 sizes, with telescopic and ratchet-jack variants for quicker implement changes.
Pins and Retaining Hardware
Hitch pins, top link pins, lower link pins, linch pins, and clevis pins secure every connection in the linkage. Our heat-treated pins are available across the diameters Mahindra-category hitches use, in bent-handle, fixed-handle, and temple-handle styles for different drawbar setups.
Linkage Balls
Lower link balls and top link balls carry implement load at every pivot point. Our hardened balls (58–62 HRC, in grades such as 16MnCr5) are manufactured for the bore sizes used on Category 1 and 2 lower links — the standard replacement for worn ball ends.
Stabilizers and Leveling Assemblies
Stabilizers stop the implement from swinging side to side — important on compact tractors where sway reaches tires and drive shafts quickly. We manufacture chain stabilizer assemblies with turnbuckle adjusters and ratchet-jack stabilizers for Category 1 and 2 tractors, plus leveling assemblies for the adjustable lift arm.
Buying for Dealers and Distributors
Mahindra’s US sales are concentrated in the compact class, which makes the stocking pattern simple and dependable:
- Category 1 top links, pins, balls, and stabilizers — the core of Mahindra parts sales
- Category 2 for the larger utility models
We sell wholesale to dealers, distributors, and agricultural parts suppliers. Factory-direct pricing, ~40-day export lead time, and ISO-managed quality make us a dependable supply source for the US market.
Verify Before You Order
Our parts are engineered to the standard ASAE/ISO dimensions for each category. Because Mahindra models vary, we do not guarantee fitment for any specific model — always measure the pin diameters and link spacing on your tractor and confirm the part matches before ordering. If you are unsure, send us photos with a ruler for scale and we will help identify the right part.
Start Your Order
Browse the 3 point linkage parts hub for the full range, or go straight to the product categories:
Request a quote with your part numbers and quantities — our export sales team responds within 1-2 business days.
Not sure which category fits your tractor? Read our tractor linkage fitment guide.
JRS Products That Fit Mahindra Category 1 Hitches
| Product | What It Is | Sizing for Cat 1 (3/4 in / 19 mm) |
|---|---|---|
| Top Link Assembly (UNC) | Adjustable top link with forged ball ends | Cat 0/1/2 options; UNC thread — the standard for North American tractors |
| Top Link End (UNC) | Replacement ball end for top link tubes | 19 mm bore (Cat 1), UNCR/UNCL |
| Hitch Pin | Drawbar and implement securing pin | Multiple diameters incl. 3/4 in range, bent/fixed/temple handles |
| Linch Pin | Quick-release retaining pin | Standard and spring variants |
| Lower Link Balls | Hardened ball for lower link sockets | 58-62 HRC, 16MnCr5, Cat 1 bore sizes |
JRS Products That Fit Mahindra Category 2 Hitches
| Product | What It Is | Sizing for Cat 2 (1 in / 25.4 mm) |
|---|---|---|
| Top Link Assembly (UNC) | Adjustable top link with forged ball ends | Cat 2 option; UNC thread |
| Top Link End (MM) | Metric-thread replacement ball end | 25.4 mm bore (Cat 2), M27/M30 threads |
| Lower Link Balls | Hardened ball for lower link sockets | Cat 2 bore sizes |
| Stabilizer Assembly | Sway control for implement stability | Chain/turnbuckle and ratchet types |
| Drawbar | Trailed-implement attachment | Multiple cross-section profiles |
Frequently Asked Questions
Are these genuine Mahindra parts?
No. Jrs Farm Parts manufactures aftermarket replacement parts to standard ASAE/ISO Category 1, 2, and 3 dimensions. They are designed to interchange with OEM components but are not manufactured by Mahindra & Mahindra.
Will this top link fit my Mahindra model?
If your Mahindra uses a standard Category 1 or 2 hitch, the matching category part fits the standard dimensions. Because models vary, always measure your top link pin diameter and confirm the category before ordering — we do not guarantee fitment for any specific model.
How do I know which category my Mahindra uses?
Measure the top link pin diameter with a caliper: 3/4 in = Category 1, 1 in = Category 2, 1-1/4 in = Category 3. Your operator manual will also state the hitch category.
Do you offer UNC and metric thread options?
Yes. Top links and top link ends are available in UNC (UNCR/UNCL, standard for North American tractors) and metric (M22-M30) threads.
Do you supply dealers and distributors?
Yes. We supply wholesale to dealers, distributors, and agricultural parts suppliers in the USA, with factory-direct pricing and standard export terms.
Verify Before You Order
Our parts are engineered to the standard ASAE/ISO dimensions for each category. Because Mahindra models vary, we do not guarantee fitment for any specific model — always measure the pin diameters and link spacing on your tractor and confirm the part matches. If unsure, send us photos with a ruler for scale and we will identify the right part.
Start Your Order
Browse the 3 point linkage parts hub for the full range. Request a Quote with your part numbers and quantities — our export sales team responds within 1-2 business days.
