New Holland tractors — from Boomer compacts on acreages to T-series machines in commercial row-crop operations — carry the Ford heritage forward into modern farming. Across that lineup, New Holland builds its 3 point hitches to the same industry standard as every other major brand: the ASAE S217 / ISO 730 dimensions. A Category 2 top link pin fits a Category 2 hitch whether the tractor is a New Holland, a Case IH, or any other brand.
Jrs Farm Parts is an ISO 9001:2015-certified manufacturer in Ludhiana, India, exporting tractor linkage parts to the USA and 60+ countries. We manufacture top link assemblies, pins, balls, and stabilizers for the hitch categories New Holland tractors use.
Important: Jrs Farm Parts is an independent manufacturer. We are not affiliated with, endorsed by, or connected to CNH Industrial or New Holland Agriculture. “New Holland” is used here only to describe general compatibility with New Holland tractors.
Which Hitch Category Does Your New Holland Use?
New Holland’s lineup runs from compact to large utility. Use this as a starting point — always confirm against your tractor’s operator manual.
| New Holland Family (General) | Typical Hitch | Notes |
|---|---|---|
| Compact models (Boomer family) | Category 1 | 3/4 in (19 mm) top link pin |
| Utility models (Workmaster family) | Category 2 | 1 in (25 mm) top link pin — the most common NH category |
| Large utility / row-crop (T-series range) | Category 2 / 3 | Larger models use Cat 3 — check pin diameter |
Quick check: measure the top link pin diameter. 3/4 in = Category 1; 1 in = Category 2; 1-1/4 in = Category 3. If in doubt, confirm in your operator manual before ordering.
New Holland Linkage Parts We Manufacture
Top Link Assemblies
The top link adjusts implement angle and connects the implement mast to the tractor. Our top link assemblies come with forged ball ends and UNC-thread center tubes in Category 1, 2, and 3 sizes — covering the range New Holland tractors use. Telescopic and ratchet-jack variants make implement hookup faster.
Pins and Retaining Hardware
Hitch pins, top link pins, lower link pins, linch pins, and clevis pins secure every connection in the linkage. Our heat-treated pins are available across the diameters NH-category hitches use, in bent-handle, fixed-handle, and temple-handle styles for different drawbar setups.
Linkage Balls
Lower link balls and top link balls carry implement load at every pivot point and wear with field work. Our hardened balls (58–62 HRC, in grades such as 16MnCr5) are manufactured for the bore sizes used on Category 1, 2, and 3 lower links.
Stabilizers and Leveling Assemblies
Stabilizers prevent implement sway during transport and operation — essential for wide implements on utility tractors. We manufacture chain stabilizer assemblies with turnbuckle adjusters and ratchet-jack stabilizers for Category 1 and 2 tractors, plus leveling assemblies for the adjustable lift arm.
Buying for Dealers and Distributors
New Holland utility tractors are predominantly Category 2 — that is the shelf line that moves fastest for NH owners. A solid stocking pattern:
- Category 2 top links, pins, balls, and stabilizers — the core of NH parts sales
- Category 1 for Boomer compacts
- Category 3 for large T-series machines, slower-moving but high-value
We sell wholesale to dealers, distributors, and agricultural parts suppliers. Factory-direct pricing, ~40-day export lead time, and ISO-managed quality make us a dependable supply source for the US market.
Verify Before You Order
Our parts are engineered to the standard ASAE/ISO dimensions for each category. Because New Holland models vary, we do not guarantee fitment for any specific model — always measure the pin diameters and link spacing on your tractor and confirm the part matches before ordering. If you are unsure, send us photos with a ruler for scale and we will help identify the right part.
Start Your Order
Browse the 3 point linkage parts hub for the full range, or go straight to the product categories:
Request a quote with your part numbers and quantities — our export sales team responds within 1-2 business days.
Not sure which category fits your tractor? Read our tractor linkage fitment guide.
JRS Products That Fit New Holland Category 1 Hitches
| Product | What It Is | Sizing for Cat 1 (3/4 in / 19 mm) |
|---|---|---|
| Top Link Assembly (UNC) | Adjustable top link with forged ball ends | Cat 0/1/2 options; UNC thread — the standard for North American tractors |
| Top Link End (UNC) | Replacement ball end for top link tubes | 19 mm bore (Cat 1), UNCR/UNCL |
| Hitch Pin | Drawbar and implement securing pin | Multiple diameters incl. 3/4 in range, bent/fixed/temple handles |
| Linch Pin | Quick-release retaining pin | Standard and spring variants |
| Lower Link Balls | Hardened ball for lower link sockets | 58-62 HRC, 16MnCr5, Cat 1 bore sizes |
JRS Products That Fit New Holland Category 2 Hitches
| Product | What It Is | Sizing for Cat 2 (1 in / 25.4 mm) |
|---|---|---|
| Top Link Assembly (UNC) | Adjustable top link with forged ball ends | Cat 2 option; UNC thread |
| Top Link End (MM) | Metric-thread replacement ball end | 25.4 mm bore (Cat 2), M27/M30 threads |
| Lower Link Balls | Hardened ball for lower link sockets | Cat 2 bore sizes |
| Stabilizer Assembly | Sway control for implement stability | Chain/turnbuckle and ratchet types |
| Drawbar | Trailed-implement attachment | Multiple cross-section profiles |
JRS Products That Fit New Holland Category 3 Hitches
| Product | What It Is | Sizing for Cat 3 (1-1/4 in / 31.75 mm) |
|---|---|---|
| Top Link End (MM) | Metric-thread replacement ball end | 31.75 mm bore (Cat 3), M30+ threads |
| Lower Link Balls | Hardened ball for lower link sockets | Cat 3 bore sizes |
| Top Link Assemblies | Category 3 top link range | Cat 3 sizing |
Frequently Asked Questions
Are these genuine New Holland parts?
No. Jrs Farm Parts manufactures aftermarket replacement parts to standard ASAE/ISO Category 1, 2, and 3 dimensions. They are designed to interchange with OEM components but are not manufactured by CNH Industrial.
Will this top link fit my New Holland model?
If your New Holland uses a standard Category 1 or 2 hitch, the matching category part fits the standard dimensions. Because models vary, always measure your top link pin diameter and confirm the category before ordering — we do not guarantee fitment for any specific model.
How do I know which category my New Holland uses?
Measure the top link pin diameter with a caliper: 3/4 in = Category 1, 1 in = Category 2, 1-1/4 in = Category 3. Your operator manual will also state the hitch category.
Do you offer UNC and metric thread options?
Yes. Top links and top link ends are available in UNC (UNCR/UNCL, standard for North American tractors) and metric (M22-M30) threads.
Do you supply dealers and distributors?
Yes. We supply wholesale to dealers, distributors, and agricultural parts suppliers in the USA, with factory-direct pricing and standard export terms.
Verify Before You Order
Our parts are engineered to the standard ASAE/ISO dimensions for each category. Because New Holland models vary, we do not guarantee fitment for any specific model — always measure the pin diameters and link spacing on your tractor and confirm the part matches. If unsure, send us photos with a ruler for scale and we will identify the right part.
Start Your Order
Browse the 3 point linkage parts hub for the full range. Request a Quote with your part numbers and quantities — our export sales team responds within 1-2 business days.
